Display type TFT Color LCD
Display size 12.1″
Resolution 800 x 600 pixels (SVGA)
Effective display area W246.0 x H184.5 mm [W9.69 x H7.26 in.]
Display colors 65,536 colors (No blink) / 16,384 colors (Blink)
Backlight White LED (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight service life 50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)
Brightness control 16 Levels (Adjusted with touch panel or software)
Touch panel type Resistive Film (analog)
Touch panel resolution 1,024 x 1,024
Touch panel lifetime 1,000,000 times or more
Language fonts Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese, Simplified Chinese, Thai and Cyrillic can be added from the font setting of the screen editor. )
Character sizes Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font sizes Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.*1
8 x 8 dots 100 char. x 75 rows
8 x 16 dots 100 char. x 37 rows
16 x 16 dots 50 char. x 37 rows
32 x 32 dots 25 char. x 18 rows
Rated input voltage 100 to 240 Vac
Input voltage limits 85 to 264 Vac
Rated frequency 50 / 60 Hz
Rated frequency range 47 to 63 Hz
Allowable voltage drop 1 cycle or less (Voltage drop interval must be 1 second or more.)
Power consumption 100 Vac: 56 VA or less, 240 Vac: 77 VA or less
In-rush current 30 A or less
Noise immunity Noise Voltage : 1,500 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)
Voltage endurance 1,500 Vac, 20 mA for 1 minute (between power terminal and FG terminals)
Insulation resistance 500 Vdc, 10 MΩ or more (between power terminal and FG terminals)
Application memory When using GP-Pro EX:
– Media: FLASH EPROM
– Screen Area: 32MB *Use the screen area when the user font area’s capacity is exceeded – for example, when an image font or a picture font is used.
– User Font Area: 8MB
– Logic Program Area: 132KB (Equivalent to 15,000 steps) *Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
– Free Space: None
Removable System: No
Backup memory
When using GP-Pro EX:
– Screen Area: SRAM 320KB
– Variable Area: SRAM 64KB
Battery: Replaceable battery / Primary battery for clock data backup
Clock accuracy ±65 sec./month (deviation at room temperature and power is OFF)*1
Serial (COM1) Asynchronous Transmission: RS-232C, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: D-Sub 9 (plug)
Serial (COM2) Asynchronous Transmission: RS-422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, 187,500 bps (MPI), Connector: D-Sub 9 pin (plug)
USB (Type A) Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA or less
Communication distance: 5 m [16.4 ft.] or less
USB (mini-B) Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less
Ethernet IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1
SD card SD Card Slot x 1
Đánh giá
Chưa có đánh giá nào.